Running 'testthat.r' [82s]
Running the tests in 'tests/testthat.r' failed.
Complete output:
  > library(testthat)
  > library(openVA)
  ────────────────────── Attaching packages for openVA 1.1.0 ─────────────────────
  ✔ InSilicoVA 1.4.0
  ✔ InterVA4   1.7.6
  ✔ InterVA5   1.1.3
  ✔ Tariff     1.0.5
  ── Optional packages (require manual installation if not attached) ─────────────
  × nbc4va     
  If you need to use these methods, you may need to load or install the packages: nbc4va.
  > 
  > test_check("openVA")
  InSilicoVA Sampler Initiated, 200 Iterations to Sample
  ...........
  Iteration: 100 
  Sub-population 0 acceptance ratio: 0,58 
  0,02min elapsed, 0,02min remaining 
  .........
  Overall acceptance ratio
  Sub-population 0 : 0,5800 
  Organizing output, might take a moment...
  ..........10% completed
  ..........20% completed
  ..........30% completed
  ..........40% completed
  ..........50% completed
  ..........60% completed
  ..........70% completed
  ..........80% completed
  ..........90% completed
  ..........100% completed
  .10% completed
  .20% completed
  .30% completed
  .40% completed
  .50% completed
  .60% completed
  .70% completed
  .80% completed
  .90% completed
  .100% completed
  100% completed
  
  Start re-sampling for significant Tariff cells
  Calculating ranks
  InSilicoVA Sampler Initiated, 200 Iterations to Sample
  ...........
  Iteration: 100 
  Sub-population 0 acceptance ratio: 0,58 
  0,01min elapsed, 0,01min remaining 
  .........
  Overall acceptance ratio
  Sub-population 0 : 0,5800 
  Organizing output, might take a moment...
  ..........10% completed
  ..........20% completed
  ..........30% completed
  ..........40% completed
  ..........50% completed
  ..........60% completed
  ..........70% completed
  ..........80% completed
  ..........90% completed
  ..........100% completed
  
  Start re-sampling for significant Tariff cells
  Calculating ranks
  ..........10% completed
  ..........20% completed
  ..........30% completed
  ..........40% completed
  ..........50% completed
  ..........60% completed
  ..........70% completed
  ..........80% completed
  ..........90% completed
  ..........100% completed
  [ FAIL 1 | WARN 2 | SKIP 0 | PASS 881 ]
  
  ══ Failed tests ════════════════════════════════════════════════════════════════
  ── Error ('tests.convertdata.r:46'): (code run outside of `test_that()`) ───────
  Error in `open.connection(file, "rt")`: cannot open the connection to 'http://ghdx.healthdata.org/sites/default/files/record-attached-files/IHME_PHMRC_VA_DATA_NEONATE_Y2013M09D11_0.csv'
  Backtrace:
      ▆
   1. └─utils::read.csv(phmrc_url_neonate) at tests.convertdata.r:46:0
   2.   └─utils::read.table(...)
   3.     ├─base::open(file, "rt")
   4.     └─base::open.connection(file, "rt")
  
  [ FAIL 1 | WARN 2 | SKIP 0 | PASS 881 ]
  Error: Test failures
  In addition: Warning message:
  In length(end) :
    closing unused connection 6 (http://ghdx.healthdata.org/sites/default/files/record-attached-files/IHME_PHMRC_VA_DATA_NEONATE_Y2013M09D11_0.csv)
  Execution halted